WEBVTT FILE

1
00:00:00.090 --> 00:00:04.290
James Webb is currently undergoing a cryogenci vacuum test in a very large chamber

2
00:00:04.290 --> 00:00:08.350
called Chamber A at NASA Johnson Space Center

3
00:00:08.350 --> 00:00:12.380
and the purpose of this test to make sure that all the components of the telescope

4
00:00:12.380 --> 00:00:16.490
are going to function in the cold vacuum environment of space

5
00:00:16.490 --> 00:00:20.690
Title: Nithin Abraham, NASA Coatings engineer. Abraham: I'm a coatings engineer and I'm working very closely

6
00:00:20.690 --> 00:00:24.690
with the James WEbb Contamination Control team. Before we start the

7
00:00:24.690 --> 00:00:28.730
cryogenic test, the contamination control team works to clean the inside of the chamber so

8
00:00:28.730 --> 00:00:32.850
Webb can stay as contamination free as possible. It's not possible

9
00:00:32.850 --> 00:00:36.930
for anyone to access the chamber during the test so, we have to

10
00:00:36.930 --> 00:00:41.050
do all our contamination mitigation before the test starts.

11
00:00:41.050 --> 00:00:45.090
and my job specifically involves the development and testing of

12
00:00:45.090 --> 00:00:49.220
a new NASA coatings technology that can help mitigate

13
00:00:49.220 --> 00:00:53.340
molecular contamination concerns. So, the plenum is an area at the

14
00:00:53.340 --> 00:00:57.520
bottom of Chamber A, its the space directly below where Webb sits

15
00:00:57.520 --> 00:01:01.600
ready for testing. To get tot he plenum, we have to carefully walk

16
00:01:01.600 --> 00:01:05.690
in the space between the helium shroud, which is surrounding Webb,

17
00:01:05.690 --> 00:01:09.850
and the outer wall of Chamber A. There's no lights so we have to

18
00:01:09.850 --> 00:01:13.960
wear headlamps. The plenum is considered a confined space becuase

19
00:01:13.960 --> 00:01:18.140
there's only one way in, and only one way out. We have to wear oxygen

20
00:01:18.140 --> 00:01:22.330
sensors to make sure that it's safe to be down there. We have to

21
00:01:22.330 --> 00:01:26.460
take a ladder down to the plenum, that's the lowest level at the bottom of the chamber.

22
00:01:26.460 --> 00:01:30.660
And the floor, is actually the curved bottom of Chamber A.

23
00:01:30.660 --> 00:01:34.750
So there are molecular contaminants that exist in the plenum

24
00:01:34.750 --> 00:01:38.800
for example you have your hydrocarbons and your silcones and

25
00:01:38.800 --> 00:01:42.850
these are sometimes very difficult to remove almost completely,

26
00:01:42.850 --> 00:01:47.020
and the contamination team has done an amazing job of reducing the

27
00:01:47.020 --> 00:01:51.170
existing levels down to a very minimal amount and it's

28
00:01:51.170 --> 00:01:55.360
this residual contaminants that can essentially out-gas during

29
00:01:55.360 --> 00:01:59.440
vacuum testing, spread throughout the chamber, and perhaps even deposit on a

30
00:01:59.440 --> 00:02:03.570
very cold. sensitive surface such as James Webb. Graphic: Molecular Adsorber Coating is a highly pourous material that can be sprayed onto surfaces

31
00:02:03.570 --> 00:02:07.650
to passively capture molecular contaminants. Abraham: to tackle the problem at the source and

32
00:02:07.650 --> 00:02:11.720
that's why we placed the MAC samples in the plenum area.

33
00:02:11.720 --> 00:02:15.780
We do a thorough analysis on the types of contaminants that

34
00:02:15.780 --> 00:02:19.940
were collected and how much, the data is very useful and shows that

35
00:02:19.940 --> 00:02:24.010
we are protecting James Webb from molecular contamination

36
00:02:24.010 --> 00:02:28.110
I've devoted a lot of my early career developing and testing

37
00:02:28.110 --> 00:02:32.300
this coating, and I'm really happy to see it being used on a lot of flight projects.

38
00:02:32.300 --> 00:02:36.500
beep beep  beep beep

39
00:02:36.500 --> 00:02:37.791